Production testing requires only that a PASS/FAIL result be
obtained. You may set up CableEye so that the operator needs only
to press the TEST pushbutton on the fixture and read results on
nearby LED lamps. Using the mouse or keyboard, or reading the
screen, becomes unnecessary. The test engineer would initially
create a "Macro" (also called a "Script")
to specify a desired test procedure. Then the operator loads the
Macro and may immediately begin testing without any knowledge
of the set-up procedure. Start
1 +
| - Click
the Macro button to open the "Automatic Test" window.
2 + | - Then, choose the Macro to load from the menu. You may create any number of Macros for different jobs. You will find the example shown here on your distribution disk.
3 + | - The Macro specifies the test operations you need for a particular job. Easily create Macros by choosing commands from a menu (not shown here). You may modify the Macro at any time with the "Edit" function, and save the final Macro on disk for future use.
4 + | - Press the TEST pushbutton on the fixture, or click the "Execute" button on the screen, to begin testing. Results are shown on bright LED lamps.
5 + | - If CableEye detects a fault, this Macro shows the problem in a "Differences List" (see Line 10). The problem found here is a missing connection between pin 15 on the left and pin 15 on the right.
End of Topic -
Next Topic | Previous
Topic | Back to Begnning of This
Topic