NOTE: Several CableEye models are available, all using the same software and following the same operating principles. The drawing below illustrates Model M2 (Item 811). The software will operate on Windows 95/98, or Windows NT systems.
Removable connector boards attach to the top of the tester.
Each board provides mating connectors for the cable you test and
may be instantly changed to a different type. Two CB15 boards
(Item 745) are shown in this drawing. Mix and match boards as
needed to accommodate the connectors on your cables. You may attach
a cable between any left connector and any right connector. CableEye's
software automatically finds the proper connector. Expand the
system to over 1000 test points for large cables and wiring harnesses
by connecting expansion modules as needed.
End of Topic
Next Topic | Back
to Beginning of This Topic