Quickly Locate Intermittent Connections

• Loop test while flexing cable to induce questionable connections to fail.
• Display remembers failures in an accumulating graphic image.
• Print result for rework station.

Flex a cable during the Continuous Test function to look for intermittent connections. If any are found, you will hear an audible beep and see an error report schematic (see below) with the intermittent connections highlighted.

The highlighted wire indicates the conductors whose continuity or resistance changed during the test. In this case, there is a intermittently open connection between pin 15 on the left and pin 15 on the right. You may print the result by clicking the "Printer" icon in the main tool bar (not shown).