News Release Index

CAMI Research Re-Releases Continuity-Testing Video Tutorial Series

CableEye Cable & Harness Continuity & HiPot Testers

CAMI Research Inc. (Acton, MA) has re-released an instructional continuity-testing video series for the field of cable and harness testing. The series covers ‘golden’ cable creation, test, and documentation stages of the manufacture of cables and harnesses. The tutorials include techniques that can also be used with backplanes and components, and guided assembly, and are demonstrated with live examples using CableEye and its latest (v5) software.

Full Release (html) Download pdf


CAMI Research to Host Continuity & HiPot Testing Seminar & Training Sessions at WPT Expo, Milwaukee

CableEye Cable & Harness Continuity & HiPot Testers

CAMI Research Inc. (Acton, MA) will again host seminar & professional development training sessions at the Wire Processing Technology Expo in Milwaukee, and offer opportunities to win $500 in CableEye® accessories. These sessions will be held on the Tuesday – the EXPO set-up day. As an exhibitor, they will reveal a new self-driven exhibit for visitors to experience CableEye’s ease of use and flexibility, especially regarding automated testing.

Full Release (html) Download pdf


CableEye® 4-Wire Calibration Verification Board, CB52

Sold as a SINGLE board, the CB52 contains a series of eleven precision low-value resistors for checking against the system’s calibrated values. The precision resistor values span a significant enough range to provide complete confidence of valid calibration.

CAMI Research Inc. (Acton, MA) announces another new interface board for its CableEye cable and harness testing systems. Populated with precision resistors it allows users to determine empirically whether the HVX optional, add-on, 4-Wire measurement function requires calibration.

Full Release (html) Download pdf


CableEye® Surface Mount & Through-Hole Board, CB51

The CB51, sold without connectors, contains four sets of 60 solder pads accommodating numerous configurations of surface mount and TH connectors

CAMI Research Inc. (Acton, MA) announces another new board for its CableEye cable and harness testing systems. Populated with solder pads to accept both aligned and staggered, 1.25mm and 1.5mm pitch, surface mount and through hole (TH) connectors, the board addresses any market with a demand for board-to-board connections. Rated to 700Vdc/500Vac, the CB51 may be used on all CableEye models.

Full Release (html) Download pdf


CAMI Research, a WHCC Top Product Winner, Reports Milestone Continuity Measurement

CableEye Cable & Harness Continuity & HiPot Testers

CAMI Research Inc. (Acton, MA), a 2015 Wire Harness & Cable Connector Top Product winner, reports that a customer has successfully tested simultaneous, multipoint continuity in a two-mile long, multicore cable (rated at 10Ω/1000ft) using a CableEye M3UH tester.

Full Release (html) Download pdf


CAMI Research, a WHCC Top Product Winner, Issues New Catalog

CableEye Cable & Harness Continuity & HiPot Testers

CAMI Research Inc. (Acton, MA), a 2015 Wire Harness & Cable Connector Top Product winner, has issued its latest catalog featuring new products and services. Available immediately, the catalog showcases their expanding CableEye suite of Low and High Voltage (HiPot) test system products for cable & wire harness manufacturing.

Full Release (html) Download pdf


CableEye® 2100Vdc Screw Terminal Connector Board, CB29H

CableEye Cable & Harness Continuity & HiPot Testers

CAMI Research Inc. (Acton, MA) announces another new board for its CableEye cable and harness testing systems. Populated with four 16-pole screw terminal blocks, the board addresses high voltage (HiPot) testing to 2100Vdc/1200Vac. Of particular interest to the harness testing market, the CB29H is also available as a transition board variant (CB29AH).

Full Release (html) Download pdf


CAMI Research, a WHCC Top Product Winner, to Host Seminar & Training Sessions at WPT Expo, Milwaukee

CableEye Cable & Harness Continuity & HiPot Testers

CAMI Research Inc. (Acton, MA) will host seminar & training sessions at the Wire Processing Technology Expo in Milwaukee, and offer opportunities to win $500 in CableEye® accessories. As an exhibitor, they will newly demonstrate how to electrically measure cable length to within 2ft and to determine wire twist relationships.

Full Release (html) Download pdf


CableEye® Micro-MaTch™ Board, CB49

The CB49, sold without connectors, contains nine sets of 20 solder pads accommodating numerous configurations of Micro-MaTch connectors.

CAMI Research Inc. (Acton, MA) announces a new board for its CableEye cable and harness testing systems. Populated with solder pads to accept a suite of TE-Connectivity™ Micro-MaTch connectors, the board addresses markets plagued by vibration and fretting corrosion, and requiring “miniaturized connectivity”. Rated to 500Vdc/350Vac, the CB49 may be used on all CableEye models.

Full Release (html) Download pdf


CableEye® CAMI Research Expands Distributorship Network ... Again!

CableEye HiPot tester (lhs), low voltage continuity tester (rhs)

CAMI Research Inc. (Acton, MA) has appointed a new distributor for its CableEye cable and harness testing systems. ALLDAQ joins Meilhaus in serving CableEye customers in Germany, Austria, and German-speaking Switzerland, and is CAMI's 21st global distributor.

Full Release (html) Download pdf


CableEye® Tester Calibration Verification Board, CB50

The CB50 contains a network of precision resistors for checking resistance, and two diodes for checking diode polarity.

CAMI Research Inc. (Acton, MA) announces a new board for its CableEye cable and harness testing systems. Populated with precision resistors, it allows users to determine empirically whether the tester requires calibration. The CB50 may be used on all CableEye models.

Full Release (html) Download pdf


CableEye® CAMI Research Expands Distributorship Network

CableEye HiPot tester (lhs), low voltage continuity tester (rhs)

CAMI Research Inc. (Acton, MA) has appointed two new distributors for its CableEye cable and harness testing systems. Semicon (Poland & Eastern Europe), and LK Hitech (Korea) bring the number of global distributors to twenty.

Full Release (html) Download pdf


CableEye® Quick-Change, Shielded RJ45 Adapter Board, CB18C

CableEye Mini HDMI, Mini Display-Port Daughter Board, CB26T shown with CB26

CAMI Research Inc. (Acton, MA) announces a new connector board for its CableEye cable and harness testing systems. Populated with eight, shielded RJ45 connectors, the boards may be used to test shielded or unshielded cables. Hipot rated to 500 Vdc/ 350 Vac, the CB18C may be used on all CableEye models.

Full Release (html) Download pdf


CableEye® Mini HDMI, Mini Display-Port Daughter Board, CB26T

CableEye Mini HDMI, Mini Display-Port Daughter Board, CB26T shown with CB26

CAMI Research Inc. (Acton, MA) announces a new daughter board for its CableEye cable and harness testing systems. Populated with mini HDMI and mini Display-Port connectors, the boards address the computer video market. Rated to 500Vdc/350Vac, the CB26T may be used on all CableEye models.

Full Release (html) Download pdf


CableEye® upgrade program announced - upgrades original serial port testers to USB interface

CableEye Dynamic GUI - Netlist showing Asymmetric tolerancing for resistance measurements

CAMI Research Inc. (Acton, MA) is offering a comprehensive upgrade program to owners of its original (serial port) M2 and M3 testers that will help expand test capabilities and productivity. These systems were manufactured between 1997 and 2010, and this program is typical of the company’s dedication to delivering excellent and sustained customer service. Serial port to USB upgrade orders placed before the end of the year will receive a free, warranty extension.

Full Release (html)


CableEye® Testers offer Asymmetric, Absolute, and Percentage Tolerancing for Resistance Measurements

CableEye Dynamic GUI - Netlist showing Asymmetric tolerancing for resistance measurements

CAMI Research Inc. (Acton, MA) offers a comprehensive tolerancing option to its standard CableEye cable and harness testing system Graphical User Interface (GUI). The intuitive, graphic-rich GUI provides a clear simple operator interface and, for resistance measurements, may be user-set asymmetrically in either absolute or percentage parameters.

Full Release (html) Download pdf CableEye テスタは、抵抗値測定用に非対称、絶対値、パーセンテージ
の許容範囲設定を提供します。

CableEye® HiPot Cable & Harness Test System, HVX-21

CableEye HVX-21

CAMI Research Inc. (Acton, MA) announces an addition to its CableEye cable and harness testing system suite, specifically to the HV product line. The HVX-21 extends the HiPot test voltage range to 2100 Vdc and 1200 Vac permitting detection of even more subtle defects.

Full Release (html)Download pdf CableEye 高電圧ケーブル/ハーネス・テストシステム HVX-21

CableEye® Multilingual GUI includes Japanese

CableEyeJapanese GUI

CAMI Research Inc. (Acton, MA) has added a Japanese language option to its standard CableEye cable and harness testing system Graphical User Interface (GUI). The intuitive, graphic-rich GUI provides a clear simple operator interface for production workers, and may now be user-set to any of seven global languages: ENG, ESP, DEU, FRA, TUR, CHN, JPN.

Full Release (html) Download pdf CableEye 多言語 GUI が日本語を収録

CableEye® Training and Verification Adapter Board, CB-T1

CB-T1 Training Board

CAMI Research Inc. (Acton, MA) announces a new, dual-purpose connector board for training new users on its CableEye cable and harness testing systems, and for performing tester system verification.

Full Release (html) Download pdf CableEye® トレーニング/検証アダプタ基板,CB-T1

CableEye® Software offers Simplified Automation User Interface

CableEye Simplified Automation User interface

CAMI Research Inc. (Acton, MA) announces an update to its CableEye Software enabling a Simplified Automation User Interface with its Cable and Harness Testing Systems.

Full Release (html)Download pdf
Share This Page