CB26 provides the support frame part of our two-board system of mounting connectors available only in right angle format. This board provides two 68-pin 2mm headers designed to mate with either the CB26A, CB26B, CB26C, or CB26D plugboards (sold separately). Up to two plugboards may be attached simultaneously and are held in place with right-angle brackets. Each plugboard houses right angle connectors. Set of two boards. Expander cable included with CB26B.
|
CB26A Smart Serial Connectors CB26A offers two Cisco-style 26-pin Smart Serial connectors. The connectors may be used independently or together for a two-ended cable. An aluminum hold-down bracket clamps the small, fragile Smart Serial connector to the board for extra support when testing long or stiff cables. Requires the CB26 Small Frame Motherboard (Item 756) for operation. Set of two boards. Photo shows CB26 (black) with the CB26A (green) plugged into the first slot. The second slot is available for another plugboard. |
|
CB26B 0.8mm VHDCI Connectors CB26B offers two 0.8mm VHDCI connectors, one of 50 pins and the other of 68 pins. An expander cable comes with this board to bring extra test points to the board for the 68-pin connector. Needs the M2 or M3 tester; will not work with M2-Basic (insufficient test points). Requires the CB26 Small Frame Motherboard (Item 756) for operation. Set of two boards. Photo shows CB26 (black) with the CB26B (green) plugged into the second slot. The first slot is available for another plugboard. See close-up of connectors below right. |
|
CB26C Modular Plugs CB26C (shown below) supports four sizes of modular plugs. The 4-position 4-conductor mates with handset cords, a 6-position 6-conductor jack mates with RJ11 and RJ12 cables, a shielded 8-position 8-conductor jack accepts RJ45 cables, and a shielded 10-position 10-conductor jack accepts RJ48 cables. The connectors may be used independently or together for a multi-ended cable. Requires the CB26 Small Frame Motherboard (Item 756) for operation. Set of two boards. Photo shows CB26 (black) with the CB26C (green) plugged into the first slot. The second slot is available for another plugboard. |
|
CB26D IEEE 1394b, USB miniB, Serial ATA CB26D accepts the Firewire 1394b connector (9 pins plus two shields), the USB miniB connector (5 pins plus shield), and the Serial ATA connector (7 conductors). Two Serial ATA connectors are provided and may be used simultaneously for multi-headed cables. Requires the CB26 Small Frame Motherboard (Item 756) for operation. Set of two boards. Photo shows CB26 (black) with the CB26D (green) plugged into the first slot. The second slot is available for another plugboard. See close-up of connectors below right. |
|
CB26E - HDMI (High Definition Multimedia Interface) CB26E offers two independent HDMI connectors (19 pins plus shield). These connectors may be used simultaneously for multi-headed cables. Requires the CB26 Small Frame Motherboard (Item 756) for operation. Set of two boards. Photo shows CB26 (black) with the CB26E (green) plugged into the first slot. The second slot is available for another plugboard. See close-up of connectors below right. |
|
CB26F - InfiniBand CB26F accepts the InfiniBand connector (25 pins plus shield). Two independent connectors are provided and may be used simultaneously for multi-headed cables. Requires the CB26 Small Frame Motherboard (Item 756) for operation. Set of two boards. Photo shows CB26 (black) with the CB26F (green) plugged into the first slot. The second slot is available for another plugboard. See close-up of connectors below right. |
