Item 859
Previous Item | Next Item

Wrist Strap

Use this optional wrist strap in place of the probe to touch wires, pins, or electrical contacts of interest with your fingers, freeing the hand that would normally hold the probe. A 1 MΩ resistor isolates the body contact from your CableEye® tester but allows sufficient current to flow for detection. Use with the CableEye software Probe function, the AutoBuild™ guided assembly software (Item 728), and PinMap™ fixture editor (Item 708). Not compatible with M2 series testers.


1 MΩ Resistor Inline for Safety