CableEye^® Low Voltage, Cable & Wire Harness,
Continuity Test Systems

From 128 Test Points
M3/M4 Expandable to 2560 Test Points

Low Voltage Cable Testers
M2Z, M3Z, M4

All testers ship with operating software and probe.

Scan for Continuity (Opens, Shorts, Miswires, Intermittent Connections)

Measure above, resistance, and check quality of intended connections and non-connections (M3-series and M4)

Measure all above, capacitance, twist pair relationships, wire/cable length, and length to fault (open/short). (M4)

Dynamic, graphic-rich Netlist/Wiring display:

Confirm diode orientation
Set asymmetric tolerances in absolute or %
Over 500 connector graphics included

Out-of-the-box, customizable & printable color reports

Multilingual navigation screens, reports & labels

PASS/FAIL check or diagnostic GUI screens - your choice

Quick-change, automatically-detected CB boards:

Over 60 different stock boards accommodate well over 200 standard connector types
Universal CB8 board for prototyping and circular connectors, or CB28 for bare wires
CB15 set included

All control modules, except the M2Z, handle cables of up to 76 conductors and are expandable:

Layer one or more 128-point expansion modules under control module, to accomodate larger cables

M2Z control module handles cables of up to 64 conductors and is not expandable

9x12" bench footprint

Item 814, M2Z
Continuity Tester
128 TPs, non-expandable

Item 826, M3Z
Resistance, Connection Quality, and Continuity Testers
128 TPs plus 24 Accessory Points, expandable

Item 824, M4
Capacitance, Twist Pairing, Resistance, Connection Quality, and Continuity Tester
128 TPs plus 24 Accessory Points, expandable